Pocket charger status (strip light) blinking white
Let's Perform a RESET:
1. Place the holder in the Pocket Charger. Ensure to place it correctly.
2. Press and hold down the ON/OFF button on the Pocket Charger for 10 seconds until status lights fade out
Please note: If your IQOS ILUMA is turned OFF at the time of RESET; when pressing the button, after the first 4 seconds, the device will turn ON: lights will fade in and the device will vibrate. In order to perform the RESET correctly, it is important to keep the button continuously pressed for 10 seconds.
3. RESET is confirmed when status lights fade in again and the device vibrates
Visit “Get Support” section to learn further tips about the maintenance of your device.
Within “Get Support” page, you can find useful tip and tricks, firmware update and more information about your device usage and maintenance. Visit get support page!
Pocket charger status (strip light) blinking yellow/orange
Your Pocket Charger needs to be charged
Ensure the optimal charging for your device:
Always use the official IQOS power adaptor and cable, plug it to your pocket charger and then to a wall power outlet for two hours in order to guarantee a full charge.
During charging, the strip lights on the pocket charger will pulse.15 minutes of charge should be sufficient for the yellow light to disappear
To check the level of charge of your device, brief press and release of the pocket charger button. For a fully charged device, all 4 strip lights should be solid white.
After these steps, did your pocket charger start to be charged?
Pocket charger status (strip light) blinking yellow
Your device might need a RESET
Let's Perform a RESET:
1. Place the holder in the Pocket Charger. Ensure to place it correctly.
2. Press and hold down the ON/OFF button on the Pocket Charger for 10 seconds until status lights fade out
Please note: If your IQOS ILUMA is turned OFF at the time of RESET; when pressing the button, after the first 4 seconds, the device will turn ON: lights will fade in and the device will vibrate. In order to perform the RESET correctly, it is important to keep the button continuously pressed for 10 seconds.
3. RESET is confirmed when status lights fade in again and the device vibrates
After these steps, is your pocket charger working?
Your holder might be giving you a warning about its charge
When your device is being charged with an unofficial power adaptor and cable or with a laptop, it receives the charge much slower. During this moment, if the holder is used and was put back into the pocket charger; for the next experience, your holder doesn’t get the charge fast enough, and warns you about it with the red blinking status light.
If the contacts between your holder and pocket charger are dusty, this also doesn’t let your holder to charge fast enough and again, your holder warns you about it with the red blinking status light
1. Ensure the optimal charging for your device:
Use official IQOS power adaptor and cable. Unofficial ones may interrupt the charging.
Refrain from charging with a laptop. This may also interrupt the charging.
Check and remove, if necessary, residues or dust that may interfere with the contacts between holder and pocket charger
2. Ensure that your device is used within the operating temperature (0-40°C); environmental temperature may affect holder’s charging speed as well
After this information and steps, did you resolve the issue?
1. Place the holder in the Pocket Charger. Ensure to place it correctly.
2. Press and hold down the ON/OFF button on the Pocket Charger for 10 seconds until status lights fade out
Please note: If your IQOS ILUMA is turned OFF at the time of RESET; when pressing the button, after the first 4 seconds, the device will turn ON: lights will fade in and the device will vibrate. In order to perform the RESET correctly, it is important to keep the button continuously pressed for 10 seconds.
3. RESET is confirmed when status lights fade in again and the device vibrates
After this information and steps, did you resolve the issue? (Please note that, if you choose “NO”, this will take you to holder diagnostics. In this case, please choose “red blinking light” on holder)
1. Place the holder in the Pocket Charger. Ensure to place it correctly.
2. Press and hold down the ON/OFF button on the Pocket Charger for 10 seconds until status lights fade out
Please note: If your IQOS ILUMA is turned OFF at the time of RESET; when pressing the button, after the first 4 seconds, the device will turn ON: lights will fade in and the device will vibrate. In order to perform the RESET correctly, it is important to keep the button continuously pressed for 10 seconds.
3. RESET is confirmed when status lights fade in again and the device vibrates
After these steps, is your pocket charger working?
1. Place the holder inside the pocket charger. Ensure to place it correctly.
2. Press the pocket charger button for 4 seconds to turn your device ON. Remember, the same action applies to turn it OFF as well. Turning OFF the pocket charger will also turn OFF the holder.
After these steps, did your pocket charger start to work?
Your pocket charger might not be getting charge from the power outlet
1. Ensure the optimal charging for your pocket charger;
Use official IQOS power adaptor and cable. Unofficial ones may interrupt the charging.
Refrain from charging with a laptop. This may also interrupt the charging
Ensure that you have plugged the pocket charger into a wall power outlet
2. Check the charging cable entrance of your pocket charger. If there is any blockage, remove the blockage by gently blowing from distance.
3. Check if your power adaptor and cable is working. Try to charge your pocket charger with another power adaptor and cable.
4. While your pocket charger is being charged, strip lights will be pulsing. Seeing a light on a deeply discharged pocket charger may take up to 15 minutes. See the demonstration.
Please note: If the pocket charger is charged whilst OFF, the lights will turn OFF when unplugging it.
1. Place the holder in the Pocket Charger. Ensure to place it correctly.
2. Press and hold down the ON/OFF button on the Pocket Charger for 10 seconds until status lights fade out
Please note: If your IQOS ILUMA is turned OFF at the time of RESET; when pressing the button, after the first 4 seconds, the device will turn ON: lights will fade in and the device will vibrate. In order to perform the RESET correctly, it is important to keep the button continuously pressed for 10 seconds.
3. RESET is confirmed when status lights fade in again and the device vibrates
After these steps, is your pocket charger working?
Cosmetic damage (such as scratches, dents, broken plastic, hairline cracks, discoloration), damage (improper handling or liquid contact) or failure caused by normal wear and tear of your device are excluded from voluntary warranty program.
Our online store offers a wide range of accessories designed for IQOS ILUMA that could help you minimize the impact of the cosmetic damage.
If you wish to speak to a Customer Care representative, please contact us at:
+62 (021) 1500 975
This product is not risk free and provides nicotine, which is addictive. Only for use by adults.
Cosmetic damage (such as scratches, dents, broken plastic, hairline cracks, discoloration), damage (improper handling or liquid contact) or failure caused by normal wear and tear of your device are excluded from voluntary warranty program.
Our online store offers a wide range of accessories designed for IQOS ILUMA that could help you minimize the impact of the cosmetic damage.
If you wish to speak to a Customer Care representative, please contact us at:
+62 (021) 1500 975
This product is not risk free and provides nicotine, which is addictive. Only for use by adults.
1. Place the holder inside the pocket charger. Ensure to place it correctly.
2. Press the pocket charger button for 4 seconds to turn your device ON. Remember, the same action applies to turn it OFF as well. Turning OFF the pocket charger will also turn OFF the holder.
After these steps, is your holder started to be charged?
1. Check the pocket charger‘s charge level by briefly pressing and releasing the pocket charger button. When your pocket charger is fully charged, all 4 strip lights will turn solid white. To ensure the optimal charging for your Pocket Charger, please always follow these steps:
Use official IQOS power adaptor and cable. Unofficial ones may interrupt the charging.
Refrain from charging with a laptop. This may also interrupt the charging
Plug the pocket charger into a wall power outlet and ensure a full charging
2. Ensure the optimal charging of your holder
Place the holder inside the pocket charger. Make sure to place it correctly
Check and remove, if necessary, residues or dust that may interfere with the contacts between holder and pocket charger
Holder lights on the Pocket Charger will start pulsating to confirm the device is charging
Leave the holder to charge for about 5 minutes or until the first light turn solid white
After these steps, did your pocket charger start to charge the holder?
Cosmetic damage (such as scratches, dents, broken plastic, hairline cracks, discoloration), damage (improper handling or liquid contact) or failure caused by normal wear and tear of your device are excluded from voluntary warranty program.
Our online store offers a wide range of accessories designed for IQOS ILUMA that could help you minimize the impact of the cosmetic damage.
If you wish to speak to a Customer Care representative, please contact us at:
+62 (021) 1500 975
This product is not risk free and provides nicotine, which is addictive. Only for use by adults.
Bluetooth connection issues, cosmetic damages (such as scratches, dents, broken plastic, hairline cracks, discoloration), damage or failure caused by normal wear and tear of your device are excluded from voluntary warranty and accidental damage coverage.
If you wish to reach a customer service representative, visit “contact us” page to choose the channel of your preference.
Cosmetic damage (such as scratches, dents, broken plastic, hairline cracks, discoloration), damage (improper handling or liquid contact) or failure caused by normal wear and tear of your device are excluded from voluntary warranty program.
Our online store offers a wide range of accessories designed for IQOS ILUMA that could help you minimize the impact of the cosmetic damage.
If you wish to speak to a Customer Care representative, please contact us at:
+62 (021) 1500 975
This product is not risk free and provides nicotine, which is addictive. Only for use by adults.
Pocket charger cannot charge the holder for 20 experiences
COMMUNICATE:
The pocket charger is designed to charge your holder up to 20 experiences only when your pocket charger is FULLY Charged
20 experiences mean that 20 singles experiences or 10 double (back-to-back) experiences.
CONFIRM TOGETHER WITH THE CONSUMER:
1. Advice to use the official IQOS power adaptor and cable, plug it to your pocket charger and then to a wall power outlet (don't use laptop's USB ports).
2. During charging, the strip lights on the pocket charger will pulse.
3. This can be confirmed with a brief press and release of the pocket charger button. All 4 strip lights should be white.
4. After these steps, with a full charge, can the customer’s pocket charger charge the holder for up to 20 experiences?
DECIDE:
According to the above steps and the consumer’s claim, make the decision;
● Option A: Customer’s pocket charger can charge the holder up to 20 experiences, therefore, DO NOT replace.
● Option B: Customer’s pocket charger cannot charge the holder up to 20 experience. Proceed with the next step communication
Pocket charger cannot charge the holder for 20 experiences
Customer’s pocket charger battery capacity might be degraded by time – which is normally out of warranty
COMMUNICATE:
As any other electronic devices, the battery performance of the pocket charger reduces over time. This is a normal situation for a battery performance on electronics.
The device is rated to be used between 0 and 40deg C. If used outside, could stop an experience or affect battery life.
The reduced battery performance may affect the charging capacity of your pocket charger.
According to the electronics industry standards and our warranty terms, battery degradations are out of warranty.
However, our customer’s satisfaction is our top priority.
Let’s check if your device is still under warranty, if so, we may have the possibility to replace your pocket charger.
Make sure both Charger and Holder are registered on your profile on iqos.com.
If you are using web app, clear your cache in the browser.
Make sure your holder is inside the pocket charger before performing a Bluetooth connection.
Let’s follow these few steps to connect your mobile device to the IQOS App:
1. Remove all devices, not only IQOS, from the Bluetooth settings of the respective end device.
2. Turn OFF Bluetooth on the phone/PC.
3. Turn ON back Bluetooth on the phone/PC again.
4. Turn OFF your IQOS and turn it ON again by pressing the pocket charger button for 4 seconds. This will instantly re-active Bluetooth of your IQOS device.
5. Log in to IQOS App again and follow the shown steps.
Ensure that only one IQOS device is connected via Bluetooth.
If you are using an iOS device, make sure you launch the IQOS app using the Bluefy browser.
If this does not work, try pairing your IQOS via USB on Mac or PC. Alternatively, to get support in person, visit the nearest IQOS store
1. Place the holder in the Pocket Charger. Ensure to place it correctly.
2. Press and hold down the ON/OFF button on the Pocket Charger for 10 seconds until status lights fade out
Please note: If your IQOS ILUMA is turned OFF at the time of RESET; when pressing the button, after the first 4 seconds, the device will turn ON: lights will fade in and the device will vibrate. In order to perform the RESET correctly, it is important to keep the button continuously pressed for 10 seconds.
3. RESET is confirmed when status lights fade in again and the device vibrates
After resetting, open the IQOS App and follow instructions on the IQOS App to add a device: the IQOS App will explain how to enable Bluetooth and provides a step-by-step guide to connect
After these steps, is your device connecting properly now?
Bluetooth connection issues, cosmetic damages (such as scratches, dents, broken plastic, hairline cracks, discoloration), damage or failure caused by normal wear and tear of your device are excluded from voluntary warranty and accidental damage coverage.
If you wish to reach a customer service representative, visit “contact us” page to choose the channel of your preference.
When your IQOS is not functioning as expected, usually some generic steps help to resolve the issue. Let’s start with a RESET
Let’s perform a RESET for your device:
1. Place the holder in the Pocket Charger. Ensure to place it correctly.
2. Perform a RESET by pressing and holding down the ON/OFF button for 10 seconds until status lights fade out
Please note: If your IQOS ILUMA is turned OFF at the time of RESET; when pressing the button, after the first 4 seconds, the device will turn ON: lights will fade in and the device will vibrate. In order to perform the RESET correctly, it is important to keep the button continuously pressed for 10 seconds.
3. RESET is confirmed when status lights fade in again and the device vibrates
Overheating or plastic softening around the USB-C charging port/cable
COMMUNICATE:
Inform the customer that contamination such as fluff, dirt, dust or moisture in the USB connectors can interfere with the transmission of current from the power adaptor to the device and cause overheating.
CONFIRM TOGETHER WITH THE CONSUMER:
1. Advice to let the device cool down before handling it.
2. Make sure the device or charging cable is NOT damaged.
3. Ask to clean with a dry fabric the USB-C port of both the device and the charging cable. Suggest to not use metal tool to clean the device in order to avoid damaging it.
4. Ask to charge their device again under supervision, using the official IQOS power adaptor and cable, and not to leave the device unattended for the first minutes of charge to check for potential overheating.
DECIDE:
According to the above steps and the consumer’s claim, make the decision;
● Option A: Customer’s device or charging cable is damaged: physical damage, not covered under warranty but one replacement is allowed under Accidental Damage.
● Option B: Customer’s device is not damaged. Issued resolved. DO NOT replace.
Cosmetic damage (such as scratches, dents, broken plastic, hairline cracks, discoloration), damage (improper handling or liquid contact) or failure caused by normal wear and tear of your device are excluded from voluntary warranty program.
Our online store offers a wide range of accessories designed for IQOS ILUMA that could help you minimize the impact of the cosmetic damage.
If you wish to speak to a Customer Care representative, please contact us at:
+62 (021) 1500 975
This product is not risk free and provides nicotine, which is addictive. Only for use by adults.
No lights on Pocket Charger after a short button press
Please be aware that such malfunctions may also be caused by improper handling such as dropping the device on the floor or by ingress of liquids into the device. Such cases do not qualify for our warranty program. Should we establish such an events occurred with your device you may incur additional charges in relation to the replacement.
Can you confirm that the device was properly handled?
Please confirm you are an adult user of nicotine products aged 21+
Please confirm you are an adult user of nicotine products aged 21+
Please confirm you are an adult user of nicotine products aged 21+.
Are you an adult nicotine product user over 21 years old?
Sorry! This website is intended only for users of nicotine or tobacco products who are over 21.
This website contains information about smoke-free product, and we need your confirmation that you are an adult user of nicotine products to make sure that you are an adult in Indonesia who would otherwise continue to use nicotine products.
Country redirect
Please note this site is intended for Indonesia. In order to ensure compliance with local legal requirement, we need to redirect you to your country of origin..
