Troubleshoot
your IQOS
ILUMA i
?qlt=85&ts=1764069321302&$PNG_72_72$&fmt=png-alpha&dpr=off)
Number “0” flashing on the Touch Screen
Is number “0” flashing on the Touch screen of your IQOS ILUMA i holder 3 times?
Then your holder is discharged. Follow the steps here below to charge your holder:
- Place the holder back inside the IQOS ILUMA i Pocket Charger. Ensure it is placed correctly and close the Pocket Charger door.
- Make sure your pocket charger is charged enough to fully charge the holder.
- Leave the Holder to charge, until at least one Holder’s status light turns solid white on the Pocket Charger.
Lights on holder not
turning ON
After swiping up, are your holder lights not turning ON?
Here’s what to do to resolve the no lights issue on the holder:
- Check whether the Pocket Charger is charged for at least one experience. To identify this, at least one solid white light will turn on.
- Clean the contacts between the holder and the Pocket Charger.
- Place the holder inside the pocket charger- ensure it is placed correctly- and leave the holder until at least one of the holder lights on the Pocket Charger turns solid white.
- Remove the holder from the Pocket Charger and press the holder’s button (short press).
Pause mode is unavailable
As a first step, ensure that Performance Mode and Pause Mode are activated in the IQOS APP.
- The Touch Screen shows whether Pause mode is available or not, as Pause mode is illustrated by 2 short vertical lines at the top of the Touch Screen.
- Pause Mode can be used once in the first or second consecutive use in Performance Mode and can be activated within the first 3 minutes, or 8 puffs of the experience.
- Swipe down across the entire Touch Screen to activate the Pause mode.
• If the swiping motion does not cover the entire length of the Touch Screen, pause mode will not be activated. - Resume the experience, swipe UP across the entire Touch Screen and wait for the preheating.
• Pause Mode can last up to 8 minutes. If experience is not resumed, the Holder will automatically switch off.
FlexPuff not working
FlexPuff is designed to work with tobacco sticks. Activation and number of puffs depend on individual usage patterns thus, the extended experience might not apply to all adult consumers and/or experiences.
Your device will automatically analyze the consumed volume of aerosol and might activate FlexPuff.
When Pause is used, FlexPuff cannot be activated.
If Flexpuff will be activated, then you will be granted with 4 extra puffs, that can be used still within up to 6min experience duration.
If you need further assistance, visit our Self-diagnostics tool.
This product is not risk free and provides nicotine, which is addictive. Only for use by adults.
Do not use IQOS ILUMA™ and TEREA™ sticks with previous IQOS™ generations, as this may cause damage to your device. TEREA™ sticks contain metal parts. Keep out of reach of children to prevent disassembly or ingestion.
Visit Important information.
Want to chat?
We're here for you in-store or at your fingertips. You choose.
Phone
Please contact our IQOS CARE team 10:00 - 19:00 Sat to Thursday and 14:00 - 19:00 Fridays.
Tel. + 964 750 641 7333 (Korek)
+ 964 770 641 3333 (AsiaCell)
IQOS ILUMA™ is designed to be used only with TEREA™ sticks.
Do not ingest or disassemble TEREA™ sticks. This product contains a sharp metal part which can cause serious injury if swallowed. Keep out of reach of children. More information on www.iqos.com.