Your first steps with your IQOS ILUMA i ONE
Your first steps with your IQOS ILUMA i ONE
How to use the new IQOS ILUMA i ONE
You have got your new IQOS ILUMA i ONE: Here’s how to use IQOS ILUMA i ONE for the first time
- Press and hold the ON/OFF button of your device for 4 seconds and then release; Your device Status Lights will turn ON slowly.
- Before first use, fully charge your device for approx. 90 min following the enclosed Safety Warning & Instructions.
- Slide to open the cap. Insert a SMARTCORE STICKTM up to the filter line, until the device vibrates and Light(s) pulse(s).
- Preheating happens automatically after 1st vibration or by pressing the button for 1 second. The device is ready to use after the 2nd vibration.
- During use, the Status lights will indicate the remaining time of your experiences. When the device vibrates and the light flash, you have 2 last puffs or 30sec left.
- Once your experiences finished, remove the used SMARTCORE STICKTM and dispose as per Safety Warnings & Instructions.
- Slide to close the cap.
How to charge your IQOS ILUMA i ONE and how long to charge it
Follow these easy steps to ensure the optimal charging for your device:
- 1. Plug the AC Power Adaptor (sold separately) and cable to your device and then to a wall power outlet for 90 min for full charge.
- 2. During charging, the strip lights on the device will pulse.
- 3. If your device is fully discharged, the first light may take a few seconds to start blinking yellow. Once the device goes over 7% of charge, the color of the blinking light will change from yellow to white.
- 4. While charging, the status light blinks, indicating the level of the charge:
- a. All 4 strip lights turn solid white: 100% charge level
- b. 3 strip lights turn solid white: 75% charge level
- c. 2 strip light turn solid white: 50% charge level
- d. 1 strip light turn solid white: 25% charge level
IQOS ILUMA i ONE Advanced features
FlexPuff
- FlexPuff is a smart feature that is activated by default on new devices and may extend your experience duration based on your usage pattern still within up to 6 minutes.
- Your device automatically monitors your usage pattern and may activate FlexPuff to extend your experience.
- If Flexpuff will be activated, then you will be granted with 4 extra puffs, that can be used within the remainder of the 6min.
- FlexPuff is designed to work with tobacco sticks. Activation and number of puffs depend on individual usage patterns, thus extended experience might not apply to all adult consumers and/or experiences. FlexPuff does not activate when pause is used.
- The Light Guide will indicate once you have the additional puffs available.
- Ensure pause mode is not activated during the experience as this would prevent FlexPuff from being triggered.
How IQOS ILUMA i ONE works: usage tips
Inserting SMARTCORE STICKSTM
Make sure you only use SMARTCORE STICKSTM with your IQOS ILUMA i ONE. They are single use, so ensure you do not reinsert a used one.
Keeping device charged
Charge your IQOS ILUMA i ONE with compatible AC Power Adaptor (sold separately) and cable daily.
IQOS ILUMA i ONE User Guide
That’s not all. There’s more useful information on our IQOS ILUMA i ONE User Guide.
This product is not risk free and provides nicotine, which is addictive. Only for use by adults.
Having problems?
Troubleshoot your IQOS ILUMA i ONE
Something we haven’t covered?
There are several ways you can reach us.
Give us a ring
Sometimes you just want to hear a human voice. We get it. That’s why our phone support line connects you directly to an IQOS expert.
IQOS ILUMATM is designed to be used only with SMARTCORE STICKSTM. Do not use IQOS ILUMATM and SMARTCORE STICKSTM with previous IQOSTM generations, as this may cause damage to your device. Do not ingest or disassemble SMARTCORE STICKSTM. This product contains a sharp metal part which can cause serious injury if swallowed. Keep out of reach of children.