First steps with IQOS 2.4 PLUS

QOS 2.4 Plus charger lights

Getting started with your IQOS 2.4 Plus

  1. Press the button on your IQOS 2.4 Plus for one second until you see a light on your Pocket Charger. No light? Try charging your IQOS with the IQOS AC power adaptor and cable.
  2. Open the lid, insert the Holder into the Pocket Charger, and close. When the small light flashes, your device is charging. 
  3. Gently insert a HEETS stick into the Holder, being careful not to twist.
  4. Press and hold the Holder button. After one vibration, the Holder light will slowly pulse. When the light stops pulsing and stays sold, your Holder is ready to use. 
  5. If the light starts fading, it's almost time to remove the HEETS tobacco stick. When the light turns off, recharge your device before using it again.
Charging the IQOS 2.4 Plus

Charging your IQOS 2.4 PLUS

  1. Take out your used HEETS tobacco stick from the Holder. 
  2. Put your IQOS 2.4 PLUS Holder in the Pocket Charger and close the lid. When you see a small light flash, your Holder is flashing. 
  3. After a few minutes, the small light will stop flashing. Your Holder is charged and ready to use.
  4. When the battery lights on your Pocket Charger fade, plug it into a wall outlet using your IQOS cable and AC power adaptor to recharge.
Cleaning the IQOS 2.4 Plus holder

Cleaning your IQOS 2.4 PLUS

  1. Wait for your IQOS 2.4 Plus to cool down then slide the cap off.
  2. Tap out any loose tobacco from inside your Holder then insert the cleaning tool. Once in, gently twist two or three times before carefully removing it. 
  3. Clean your device using the cleaning sticks as often as you can. Remember to avoid the blade, and don’t forget to clean the cap top to bottom too. A cleaner device makes for a better taste experience. It’s as simple as that.

Tips from us, to you

How to insert the Heets correctly

Inserting your HEETS sticks correctly every time

Nobody wants a damaged device, that’s a given. So when inserting your HEETS stick into your IQOS 2.4 PLUS, don't twist or force it in.

How to charge your IQOS 2.4 device

Keeping on top of your battery power

Charging your IQOS 2.4 PLUS daily is the best way to make sure you're never without your IQOS device. Always use a wall outlet, and try charging it at the same time you charge your mobile phone.

IQOS 2.4 battery power on top

Starting up your IQOS 2.4 PLUS device

Press and hold the Holder button once, then release. Once the light stops flashing, it's ready to use.

That’s not all.

There’s more useful information in our IQOS 2.4 Plus User Guide.

Our IQOS 2.4 Plus User Guide will let you delve deeper into how your device works and what it can do.

Download our IQOS 2.4 Plus User Guide

Black IQOS 2.4 PLUS kit on a table

Something we haven’t covered?

There are several ways you can reach us.


No question is too small

Your question might have already been asked before. Browse our FAQs to see if there’s an answer waiting for you.

Look through our FAQ

Use our live chat

Chat to our IQOS experts in real time.  They are available Monday to Friday 8:00 – 22:00 or during the weekends and holidays 10:00 – 18:00. Give them a message and they’ll say hello within seconds.

Let's chat

Facebook us

We’re very social on our social media, so feel free to message us with any questions and we’ll get back to you in minutes. 

Our Facebook Page


Send us an email

Write to us. Our inbox is never too full.

Email us